The OKM eXp 5500 Professional is the ideal solution for exploring difficult terrains as well as large areas, quickly and easily. Whether you use the Super Sensor alone or add sensor modules, called Enhancers, this 3D terrain scanner adapts perfectly to different types of terrain, e.g. rocky mountain landscapes or vast desert areas.


Multi-sensor 3D ground scanning and multi-frequency VLF sensor with metal separation
Detection depth: With this technology, customers can find objects up to 25 m (82 ft) deep
Use cases: Archaeology, Treasure hunting, Cavity detection
Operating modes: 3D ground scanning, Magnetometer, VLF metal detection
Detectable objects: artifacts, military, large metal objects, cavities, tunnels, jewelry
Warranty: 2 years
OKM eXp 5500 Professional Multi-Technology Detector
The OKM eXp 5500 Professional offers impressive depth performance for metal detection in shallow and deep surfaces thanks to the combination of VLF and 3D ground scanning technologies. This advanced combination enables accurate measurements at different depths and expands the possibilities for exploring underground structures and finding precious metal objects in difficult terrain.

Detector with the OKM eXp 5500 PentaSense system that combines 5 Super Sensors simultaneously.
PentaSense: Multi-sensor scanning system with up to 5 simultaneous super sensors
The PentaSense system is an advanced multi-sensor system, 10 of which take over the function of 5 Super Sensors simultaneously to perform high-resolution measurements in very large scanning fields. Thus, the eXp 5500 offers treasure hunters new flexibility in terms of field and location requirements.
PentaSense wand: Ergonomic handling for better scanning results
Using the PentaSense wand allows you to balance the sensor antenna ergonomically in front of you even on sloping terrain. Due to the greater distance between the sensor and the detector, you can walk comfortably without affecting the measurements. This way, you can achieve even clearer and more accurate scanning results.
Find treasures in different terrains

The OKM eXp 5500 Professional is the ideal solution for exploring difficult terrains as well as large areas, quickly and easily. Whether you use the Super Sensor alone or add sensor modules, called Enhancers, this 3D terrain scanner adapts perfectly to different types of terrain, e.g. rocky mountain landscapes or vast desert areas.
Super Sensor Configurations: 1 – 3 – 5
The four interchangeable amplifying antennas can be connected to any of the four Super Sensor sockets, allowing for the highest flexibility in mounting. And with all four sensor modules, the PentaSense system is complete, allowing you to scan the target area as if you were holding five Super Sensors side by side at the same time.






The single Super Sensor is ideal for more specific scans in tight areas such as caves, passages and crevices.
By connecting two Enhancers on the left or right side, users configure the system to scan with 3 Super Sensors.
The full PentaSense system includes the Super Sensor with all four Enhancers. This allows you to scan large scan areas with five pairs of sensors simultaneously.
Metal Detection with VLF Technology
Very Low Frequency (VLF) allows detectors to find metal objects in shallow ground. The VLF coil emits an electromagnetic field into the ground, which generates electric currents in buried metal objects. This creates its own electromagnetic field in the target objects, which can be detected by the eXp 5500. VLF metal detectors are particularly effective at finding a variety of metals, including artifacts, relics, military objects, coins and jewelry.
Metal Discrimination for All Use Cases
With the eXp 5500 PentaCoil and its patented VLF search coil technology, treasure hunters, archaeologists, gold prospectors and military researchers can distinguish valuable metal objects made of gold and silver from relics and objects made of iron and bronze. This metal discrimination further increases efficiency and accuracy when exploring and searching for treasures and artifacts.


The eXp 5500 VLF Metal Detection Mode offers the innovative features of Multi-Frequency Zones and Target ID.
The values in the activated Target ID zones are clearly visualized and indicated by an acoustic signal. The maximum value detected is also specified by the Target ID.
Values in the disabled Target ID areas are not completely hidden, but are displayed very sparsely, to ensure that treasure hunters do not miss any potential targets.
Users can choose from predefined scan profiles that are tailored to typical target objects. Depending on the selected scan profile, certain ranges of Target IDs are masked so that unwanted objects can be ignored during treasure hunting. In addition, the best frequency channels are assigned to each scan profile in order to provide the best detection performance for the respective profile.
In addition, a custom scan profile can be created in which a single or multiple frequency ranges can be set based on your experience. This allows you to perfectly adapt the detector to individual conditions, such as mineralized soils, dry or wet sand, etc. Last but not least, the sensitivity can be changed depending on the mineralization of the soil or the amount of debris in the subsoil of the soil.

The OKM eXp 5500 Professional Super Sensor is equipped with an Orbit LED, as treasure hunters already know from the popular OKM Rover C4. The LEDs show users buried objects in real time.
Open-ear headphones support the detector in any environment. The ultra-lightweight headphones allow treasure hunters to hear the detector’s acoustic signals without completely blocking out ambient sounds. This allows users to remain alert and responsive to ambient sounds, which is especially useful in rough terrain.
The detector is equipped with a USB-C cable for fast data transfer and easy charging. After transferring scan files from the Control Unit to your Windows laptop, the scans can be analyzed in detail in the included Visualizer 3D Studio Professional Edition software.
The OKM eXp 5500 Professional Control Unit is equipped with a touchscreen and a multilingual user interface which is very intuitive and easy to control. The new display is even easier to read in direct sunlight.
The integrated USB-C port is not only used for transferring scan files and charging the battery of the OKM eXp 5500 Professional. In addition, both the Control Unit and all probes of this detector can now be updated via this port. This ensures that the detector is always equipped with the latest firmware and functions.
The possibility of battery replacement directly by the user significantly underlines the long-term reliability of the OKM detector.
Control Unit
Dimensions (L x W x H): 3 x 8.3 x 9.1″ | 75 x 210 x 230 mm
Weight: 60 oz | 1.7 kg
Battery: Li-ion, replaceable, 7.27 V, 10.2 Ah, 74.154 Wh
Input: 12 V DC, 3 A max.
Output: 6.4 – 8.4 V DC, 15 W max.
Run Time (fully charged): 7 hours @ 77°F | 25°C, average brightness
Charging Time: 3 hours @ 50–86°F | 10–30°C
Display: 8.4″ diagonal, LVDS with 1024 x 768 pixels IPS-LCD
Processing Unit: Main (ARM Cortex 4x-A53@1.6GHz ), Companion Device (1x-M33@96MHz, 1x-M4@48MHz, 1x-M33@38MHz, 1x-M7@216MHz)
Working Memory (RAM): 2 GB
Data Memory (eMMC): 8 GB
Operating Temperature: -10 °C – 50 °C
Storage Temperature: -20 °C – 60 °C
Air Humidity: 5 % – 75 %
Safety Class: IP40
Water Resistance: No
Data Transmission: USB-C
Feedback: acoustic, visual
Audio: Built-in speakers or Bluetooth-LowLatency (A2DP)
Super Sensor
Dimensions (Gj x W x D): 39.8 x 7.9 x 4.3″ | 1010 x 200 x 110 mm
Weight: 26.1 oz | 0.74 kg
Cable Length: 70″ | 180 cm
Input: 6.4 – 8.4 V DC, 4 W
Safety Class: IP40
Receiver: Dual/Hi-Gain, Vertical, Geophysical Phase Reader/EMSR
Sensor Technology: SCMI-15-D
Processing Unit: ARM Cortex-M33@38MHz
Extender
Length: 355 mm
Diameter: 45 mm
Weight: approx. 0.1 kg
Input: 5.0 V DC, 0.25 W maximum
Safety Class: IP40
Sensor Technology: SCMI-15-D
14×10″ VLF PentaCoil
Dimensions (W x D x H): 345 x 265 x 70 mm
Weight: 0.84 kg
Cable Length: 1.80 m
Input: 6.4 – 8.4 V DC, 2 W maximum
Safety Class: IP40
Technology: VLF
Unit Processor: ARM Cortex-M7@216MHz
PentaSense Bar
Dimensions, closed (W x H x D): 920 x 70 x 150 mm
Dimensions, open (W x H x D): 1520 x 70 x 130 mm
Weight: 2.76 kg
The technical data are average values. Minor deviations are possible during operation.





Reviews
There are no reviews yet.