XP DEUS II Remote Control
12 factory programs to suit all terrains in all conditions!
The control module, also known as the remote control or RC, allows you to adjust the internal settings of your DEUS II. Can be mounted on a pole or stored in a pocket – The remote control is not required if you choose to use the WS6 headset as the master to control your detector.

On the back of the remote control…
XP CONNECTOR MULTIPLE FEATURES:
Battery level
Update software
Wired headphones (optional)
Bone conduction headphones BH-01 (optional)
IP68: Certified for submersion up to 20M, guaranteed waterproofing and pressure resistance.
Waterproof up to 20M/66FT
ALL TERRAIN
INDESCRIBABLE FROM BLOWS

Fitting the cover
GREY AREA No. 1 = 1m max. This is the plug for common use on land or for a remote control submerged up to 1m.
RED AREA No. 2 = 20m max. For underwater use only. Be sure to replace it with the grey plug once you return to land.

The remote control can be cut and removed in 2 seconds… A simple press with your thumb on the end of the remote control is all it takes.

Programs
12 factory programs + 12 user programs
DEUS II has the advantage of offering a wide range of programs suitable for all field and research conditions.
GENERAL: FMF • Max. freq. 40khz • Conductive ground subtraction. GENERAL uses low and high frequencies and gives an excellent assessment of ground targets. Suitable for both novice and experienced users. Offers an excellent ground target/false signal ratio, as it rejects moisture in the ground, which can cause halos and false sounds when passing over holes, for example. You will therefore have more confidence in deep targets. This damp/wet ground subtraction attenuates very low electrical conductors such as coke (conductive coal and rock) and to a lesser extent some very thin targets such as aluminum foil.
SENSITIVE: FMF • Max. freq. 40khz • Frequency boost. SENSITIVE uses low and high frequencies up to 40 kHz. Very effective on all targets, will be very effective in mineralized and contaminated ground when searching for smaller targets.
SENSI FT: FMF • Max. freq. 40khz • Frequency gain. SENSITIVE FULL TONES is based on the same platform as Prg. 2 – SENSITIVE, but is configured with the Full Tone audio mode, with Reactivity at 3 instead of 2.5. It offers a very rich and informative sound identification that requires a little more experience, as each target index generates a different tone in proportion to the conductivity (see Discri > Full Tones). Very effective in heavily colored and mineralized ground.
FAST: FMF • Max. freq. 40khz • Frequency gain. FAST is based on the same platform as Prg. 2 – SENSITIVE, but the audio is set to Pitch mode with Reactivity at 3 instead of 2.5 and uses the square audio function. These three combined settings allow the machine to work quickly in iron-contaminated and mineralized soil.
PARK: FMF • Max. freq. 24khz • Frequency boost. PARK is adapted for searching recreational areas such as parks, dry sandy beaches, etc., places that are normally polluted.
DEEP HC: FMF • Max. freq. 14khz • Frequency boost. DEEP HIGH CODUCTOR adds together very low and medium frequencies up to 14 kHz. Designed to better locate targets of good conductivity, it is ideal for coin groups while maintaining excellent sensitivity to isolated coins using its 14 kHz frequency.
DEUS MONO: MONOFREQUENCIE adjustable from 4 to 45 kHz. DEUS MONO operates on a single frequency like 1, but combines the advantages of DEUS II, such as extended frequency range to 45 kHz, improved performance, audio quality, better EMI rejection, etc. You are more likely to connect to an unstable frequency while using several simultaneous frequencies than with just one, and DEUS MONO can help you in these situations.
GOLD FIELD: FMF • Max. freq. 40khz • Frequency increase. GOLD FIELD is intended for heavily mineralized gold ground. Gold pieces are often seen as ground or iron objects in these challenging environments. It is set to “all metal” for deeper detection and only rejects localized ground that you must regularly adjust to by grabbing (see Ground). It will accept ground above and below your Ground setting.
RELIC: FMF • Max. freq. 24khz • Frequency decrease. RELIC is processed in the same way as Prg. 8 – GOLD FIELD, but uses lower frequencies subtracted to search for large masses. It is set to “all metal” with low reactivity and only rejects localized ground that you must regularly adjust to by grabbing (see Ground). It will then accept ground above and below this ground setting.
diving: FMF • Max. freq. 14khz • Conductive ground subtraction. DIVING is the first and most stable of the three programs intended for diving in saltwater environments or simply in wet sand. Its very low and medium subtracted frequencies will better locate valuable targets such as rings and coins, while being naturally less responsive to low-conductivity targets such as aluminum foil compared to the more sensitive Beach 11 and 12 programs. Thus, it can save time and be more effective in difficult diving conditions.
BEACH: FMF • Max. freq. 24khz • Conductive ground subtraction. BEACH uses higher frequencies up to 24 kHz and is thus more sensitive to small targets compared to DIVING. It is suitable for wet areas.
BEACH SENSOR: FMF • Max. freq. 40khz • Conductive ground descent. BEACH SENS includes frequencies up to 40 kHz offering excellent sensitivity to smaller targets without losing performance on larger targets. This is the deepest beach program for wet conditions but also the most reactive.
MI-6 connection
Battery life with wireless remote control up to 25H depending on the audio output activated
Designed to last: 5 years warranty and more
Made in France








Reviews
There are no reviews yet.